MonoLuxシリーズは、1つの量子カスケードレーザー(QCL)を内蔵する波長可変外部グレーティング共振器型量子カスケードレーザーシステムです。本システムは中心波長の±5%の波長可変レンジを持ちます(オプションでもっと広いレンジが可能)。QCLとコリメート光学系が密封されたレーザーヘッドは、トラブルフリーのオペレーションを可能にします。MonoLuxはレーザーヘッド・ドライバー、制御用コンピュータがセットで提供されるターンキーシステムです。
QCLは200~500 nsのパルス幅・デューティーサイクル50%の繰り返し0.5~2 MHzの擬似CWモードで駆動します。選んだ波長によっていは、平均パワーは中心波長で300 mWを超えます。MonoLuxは100%のデューティーサイクルで駆動することによりCWにすることも可能です(オプション)。本システムは静かなオペレーションを可能にする、ファンなしの受動冷却になります。
MonoLuxは外部共振器をDFB量子カスケードレーザーに置き換えるタイプも可能です。このバージョンは波長可変レンジがかなり小さくなりますが、CW駆動時は線幅が大分狭くなります。
レーザーヘッド仕様
MonoLux-AA
駆動方式 | QCW operation with the laser head at room temperature (50 ns-500 ns micropulses at a micropulse repetition rate of 1 MHz-2 MHz) Square wave macropulse modulation up to ~40 kHz for lock-in detection CW operation by selecting 100% duty cycle (optional) |
---|---|
波長 | User specified center wavelength (AA) Available center wavelengths are 3.8 μm, 4.1 μm. 4.5 μm, 4.8 μm, 6.3 μm, 6.8 μm, 7.3 μm, 8.5 μm, 9.5 μm and 10.2 μm. |
光スペクトル | Tunable over the gain bandwidth of the QCL |
可変スピード | 100 ms - 250 ms for entire tuning range for the laser |
可変モード | Continuous and repeated scans over the entire tuning range Step and scan to any wavelength within the tuning range of the QCL (selected in the operating program on a laptop computer) Scan over selected tuning range with selected step size and selected scan speed |
パワー | Average power output of up to 500 mW at the center of each QCL tuning curve at the maximum duty cycle for the specific QCL (wavelength dependent) |
安定性 | ±3% pulse-to-pulse; ±2 % average power over hours |
パルストリガー | Internal or external; In external mode any pulse repetition sequence can be generated up to the maximum allowable duty cycle |
スペクトル幅 | < 2 nm (< 0.3 cm-1) when operated in QCW mode |
ビーム拡がり角 | Collimated with beam divergence of < 5 mrad |
ビーム品質 | Nearly diffraction limited (TEM00) |
波長精度 | Better than 0.3 cm-1 |
波長再現性 | ± 0.05 cm-1 over long period of time |
冷却 | Passively cooled for QCW; Water-cooled for CW |
ガイドビーム | Red 640nm, 4mW laser aligned with IR beams to assist optical arrangement (optional) |
サイズ・重量 | Size: 12 cm (W), 4.5 cm (H), 13 cm (D) Weight: < 0.5 kg |
コンピュータインターフェース | USB |
コンピュータ要件 | Windows XP or later computer with USB 2.0 port Software controls laser operation and allows user to select scan mode for as well as enable/disable the laser |
電源仕様
Standard 12-24 VDC computer power supply