MultiLux | マルチ波長CW出力

MultiLux

MultiLux-SW-MW1-MW2-CWシリーズは高輝度・高出力のCWマルチ波長出力レーザーシステムです。1つの近赤外光と2つの中赤外光を出力いたします。3つの波長の光は同一線上に配置され、M2が良いコリメート光にて出力します。システムは防衛やホームセキュリティーなど高いビーム品質が必要な用途に最適です。

MultiLux- SW-MW1-MW2-CWは、波長4.4 µmから4.8 µmでCW・室温パワーで3.5W(MW2)、波長3.7 µmから4.2 µmのCW・室温パワーで2 W(MW1)、1.9 µmから2.9 µmのCW・室温パワーで5W(SW)になります。3波長の共線性は< 1 mrad、どのレーザーも良いビーム品質でカップリングされているので長距離での照射にも使用できます。そのぞれのビームは個別に制御でき、任意のパルス列に変調できます。波長の組み合わせはご相談に応じます。

 

レーザーヘッド仕様

MultiLux™-SW-MW1-MW2-CW-LH

レーザー SWIR laser
— Fiber laser at 2.0 ± 0.1 μm or an optically pumped solid state laser as 2.9 ± 0.1 μm
— Power output: Up to 5 W (wavelength dependent)
— M2 < 1.5
— Modulation: Square wave modulation up to ~5 kHz (3 dB roll-off)
— Amplitude control: 0% to 100% full power
MWIR 1 laser
— Hermetically encapsulated package with a QCL, its thermoelectric cooler and exit beam collimating
optics
— Laser wavelength: ~4.0 ± 0.15 mm
— Laser bandwidth: ~200 nm
— Power output: Up to 2 W
— M2 < 1.5
— Modulation: Square wave modulation up to ~100 kHz (3 dB roll-off)
— Amplitude control: 0% to 100% full power
MWIR 2 laser
— Hermetically encapsulated package with a QCL, its thermoelectric cooler and exit beam collimating
optics
— Laser wavelength: ~4.6 ± 0.15 mm
— Laser bandwidth: ~200 nm
— Power output: Up to 3 W
— Exit beam quality: M2 < 1.5
— Modulation: Square wave modulation up to ~100 kHz (3 dB roll-off)
— Amplitude control: 0% to 100% full power

Other combinations of SWIR and MWIR wavelengths available
ビーム結合光学系 — Provides a single collimated beam containing all three wavelengths
— Three beams nearly the same diameter (±20%)
— Three beams aligned to be collinear to be within the divergence of the beams (~5 mrad)

Beam expanding optics available as an option
冷却 Air cooled operation
サイズ・重量 Physical dimensions: 10” x 10” x 6.5” (approximate)
Weight: <20 lbs (depends on wavelength configuration)

電源仕様

MultiLux™-SW-MW1-MW2-CW-PS

  • Main system control board providing all the necessary system functionality and user communication via RS 422/485; RS232/485/422 is available
  • QCL current drivers
  • QCL temperature controllers
  • SWIR laser power supply
  • Complete control of the operating mode of the two lasers; Independently operating as true CW sources
    or with internally, externally or software programmed pulse sequences suitable for providing
    applications related waveform capability (maximum square wave pulse modulation frequency: MWIR
    lasers: 100 kHz, 3 dB rollover point; SWIR laser: 5 kHz, 3 dB rollover point).
  • Rack-mount controller (other configurations available at additional cost).
  • Front panel control or control via a computer interface.
  • Cables connecting the laser controller to the laser head with length up to 15 feet (up to 50 feet, optional
    at extra cost).
  • Electrical input: 28 V DC (customer supplied); 110/220 VAC 50/60Hz (optional at extra cost)
  • Controller weight: <30 lbs (depends on wavelength configuration)
トップへ